EasyManua.ls Logo

Eminent EM7285 - Copying Media to Your Media Player (Built-In Hard Disk); Using the USB (3.0) Connection; Using the Network Connection (Samba)

Eminent EM7285
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
|
ENGLISH
8.0 Copying media to your media player
(built-in hard disk)
Once the media player has been setup, you can start to copy your media files to the
hard disk of the media player.
8.1 Using the USB (3.0) connection
The media player has a fast next generation USB 3.0 connection. Using the USB 3.0
connection, copying data will be done with incredible speed. The highest possible
transfer rate will be achieved if your computer also has a USB 3.0 connection. If your
computer does not have a USB 3.0 connection, a USB 2.0 connection can still be
used since USB 3.0 is also compatible with USB 2.0.
1. Make sure the media player is completely started.
2. Take the supplied USB 3.0 cable out of the packing.
3. Connect the USB cable to the USB 3.0 connection of the media player (blue USB
connection).
4. Connect the other side of the USB cable to your computer.
5. Your computer will automatically recognize and install new hardware. Once
finished, the media player’s hard disk will be recognized as an extra local hard
disk.
6. Use the Windows explorer to browse to the hard disk. You will now be able to
copy data to the hard disk of the media player.
7. The moment you have finished copying the data, you need to disconnect the
USB cable from your computer or media player. If not, the media player will not
be able to play the copied files.
8.2 Using the network connection (Samba)
It is also possible to copy your media using the network connection. This way, there is
no need to connect your media player to your computer.
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Network’.
3. Make sure ‘SAMBA Server’ is set to ‘On’.
4. Press the ‘Home’ button to return to the main menu.
5. Make sure your computer is started and is connected to the same network as the
media player.
6. Open the Windows Explorer and type: \\IP-Address or type the device name, in
this case: \\EM7285 and press the ‘Enter’ key.
7. Double-click ‘HDD’ after which the hard disk content of the media player is
shown.
8. You are now able to copy data to the hard disk of the media player using the
network connection.

Table of Contents

Related product manuals