21
|
ENGLISH
Hint: Connect a standard USB keyboard to simplify typing your messages!
1. Use the navigation keys to select ‘Apps’ and press the ‘OK’ button.
2. Select the app you want to use, for example ‘Buddy Link’ and press the ‘OK’
button.
3. Sign in with the username and password of your google account. A list of friends
will be shown. You can now send messages to (online) friends.
Note: The amount of available apps can vary. The available apps are offered by third
parties. Eminent can not guarantee the working of an app if a third party decides to
make changes to an app or decides to stop supporting this app.
12.0 Downloading using the media player
The EM7285 is equipped with a NZBget and a Torrent module. The Torrent module is
called Transmission. Using one of these modules, you are able to download files from
the internet. The use of these modules require an internal hard disk drive, which
needs to be formatted using the EM7285’s internal format option.
12.1 Setting up the NZBget module
Hint: The NZBget module will only start if an internal hard disk is available. Also, the
hard disk needs to be formatted using the menu of the media player.
Hint: Use the following link to access Eminent’s YouTube channel and view a detailed
NZBget workshop: http://www.youtube.com/eminenteurope
1. Make sure you know your media player’s IP-Address. This IP-Address can be
found using the ‘SetupNetworknetwork Info’ menu.
2. Open your computer’s web browser.
3. Fill out the IP-address of the EM7285 using the web browsers address bar
following :8080. For example: http://192.168.1.25:8080 or
http://192.168.1.25:8066
4. The NZB module will open.
5. Click ‘Config’.
6. Fill out the name of your news server at ‘Server1.Host’. For example:
news.provider.com.
7. Fill out the username of your news server if required at ‘Server1.Username’.
8. Fill out the password of your news server if required at ‘Server1.Password’.
9. Select the amount of used ports at ‘Server1.Connections’. ‘4’ is the default
setting.
10. Click ‘Save Changes’.
11. Click ‘Back to Main Page’.
12. Then click ‘Shutdown’ and wait a few seconds. Then click ‘Start’.
13. The NZB module is now ready to be used.
To Next Page
