3. Use the navigation buttons to go to the cog-wheel icon and click the “OK” button
on your remote control. The following screen appears:
4. Click on ‘Settings’ with the ‘OK’ button on your remote control. The following
screen appears:
5. Select “Audio”. Scroll down and press “allow passthrough” and click the “OK”
button on you remote control to activate passthrough.
6. The settings you have just changed are applicable when connected to an AV
Receiver or Home cinema set using a HDMI cable or an Optical cable.
7. Your EM7680 is now ready to play encoded files like Dolby and DTS through your
AV receiver. For Dolby True-HD and DTS-HD audio passthrough enable “True-
HD capable receiver” and “DTS-HD capable receiver”, see screen:
To Next Page
Loading...
