12(12)
5 Technical specification
Input frequency: 920-2150MHz.
Input level: 35-100 dBuV.
Input/output impedance: 75 Ohm, F-connectors.
Measuring method (Analog): - Signal presentation on LCD display in form
of thermometer scales.
- Pitch-tone, highest tone on loudspeaker.
Measuring method (Digital): - BER (bit error rate)
- S/N (signal/noise-ratio)
- Constellation (QPSK)
Max-level: - Thermometer scales showing max.
- Maxhold function.
- BER, S/N and QPSK showing max values.
Satellite-identification: Yes, by reading out the NIT in the Bitstream.
Info about the TV and Radio channels.
Memory: 100 transponders can be stored with name.
Memory locks on: FEC, Symbol-rate Frecuency, 13/18v, 22kHz.
Memory search: The instrument scans the memory positions and presents
the matching transponders.
Presentation: On LCD 3”-display.
PC-connection: Yes, RS232-connector.
Power out: Yes, 13-18V.
22 kHz tone: Yes, on/off.
DiSEqC: Yes, all 1.0 and 1.1. Also Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2.
Battery: Rechargable 12v, 1.8 amp/hour.
Operational: About 2 hour on a fully charged battery.
Weight: About 1.5 kg incl.battery.
Accessories: Nylon carrying-case.
Power-supply of 220v/13.5v, 1.7amp.
Car-charger.
2 x F-female / F-female-adapters.
To Previous Page
Loading...
