EasyManua.ls Logo

emitor satlook Lite User Manual

emitor satlook Lite
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Satlook Lite
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the emitor satlook Lite and is the answer not in the manual?

emitor satlook Lite Specifications

Power IconPower
LNB power13V or 18V. 21V selectable
power-supply100-240VAC 12V, 1.2 A
batteryRechargeable 8x AA rechargeable batteries of 1600mA each
battery lifeAbout 1 hour on fully charged batteries
Display IconDisplay
LCD resolution128x64 Pixels
backlightBacklit
Interfaces IconInterfaces
PC connectionRS232 with DB9 connector
DiSEqCYes, according to 1.0
input/output impedance75 Ohm, F-connector
Signal Processing IconSignal Processing
input frequency920-2150MHz
input level35-100 dBuV
spectrum analyzer950 MHz to 2150 MHz
Weight and Dimensions IconWeight and Dimensions
weight0.7 kg

Summary

Getting Started

Power ON/OFF

Instructions on how to turn the Satlook Lite unit ON and OFF using the OK button.

Power supply and battery

Information on operating the device with an external power supply and managing its rechargeable batteries.

How to use the meter

Guidance on connecting the meter to the LNB and initiating satellite search procedures.

Menu Navigation

Search

Searches for DVB-S signals by frequency, requiring LNB voltage and polarisation settings.

Appendix F - Technical Specification

Related product manuals