EasyManua.ls Logo

emitor satlook Lite - Appendix F - Technical Specification

emitor satlook Lite
18 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Appendix F - Technical specification
Input frequency: 920-2150MHz
Input level: 35-100 dBuV
Input/output impedance: 75 Ohm, F-connector
Measuring method (Analog):
RF Signal presentation in thermometer scale.
Loudspeaker tone changes with signal level when enabled
Measuring method (Digital):
Quality (derived from BER - bit error rate)
SNR (signal/noise-ratio)
Scales showing max signal and max values
EasyFind satellite identification: By using the Symbol Rate / FEC in the
signal and the ONID/TSID in the transport stream
Search automatically acquires DVB-S transponders using advanced
demodulator to determine FEC and Symbol Rate.
Spectrum Analyzer 950 MHz to 2150 MHz.
Backlit 128x64 Pixels LCD.
PC connection: RS232 with DB9 connector
LNB Power: 13V or 18V. 21V selectable.
22 kHz tone: Standard 22 KHz signal superimposed at 0.65V p-p on LNB-A
DiSEqC: Yes, according to 1.0.
Battery: Rechargeable 8x AA rechargeable batteries of 1600mA each.
Battery Life: About 1 hour on fully charged batteries.
Weight: About 0.7 kg including batteries.
Accessories: Orange rubber casing.
Power-supply of 100-240VAC 12V, 1.2 A
Car-charger
Emitor AB
Sjöviksbacken 14,
117 43 Stockholm, Sweden
Phone: +46 8 775 00 01
Fax:
+46 8 775 00 06
Web: www.emitor.se
Distribut
o
r
:
MERaTEST s.r.o.
Družstevná 2
916 01 Stará Turá
Tel.: 032/642 0909
Mob.: 0903 533 859
e-mail: molec@meratest.sk
web: www.meratest.sk

Related product manuals