EMKO ESM-1510 - User Manual

ESM-1510 DIN Rail Mounting
T
emperature Controller
- 3 Digits display
J type thermocouple Input or,
K type t
2-Wire PT 100 Input or,
- Selectable heating or cooling function
- NTC Input or,
PTC Input or,
hermocouple Input or,
2-Wire PT 1000 Input (It must be determined in order)
- ON/OFF temperature control
- Selection of operation with hysteresis
- Adjustable temperature offset
- Set value low limit and set value high limit boundaries
- Relay or SSR driver output
- Operation selection of compressor operates continuously, stops
or operates periodically in case of probe defect
- Compressor protection delays
- Password protection for programming mode
Instruction Manual. ENG ESM-1510 02 V02 07/08
ESM-1510 DIN Rail Mounting Type
Digital, ON / OFF Temperature Controller

EMKO ESM-1510 Specifications