To Next PageTo Next Page
Need help?Do you have a question about the EMKO EPC-1 and is the answer not in the manual?
General| Type | Temperature Controller |
|---|---|
| Protection Class | IP20 |
| Input | Thermocouple, RTD |
| Output | Relay |
| Control Mode | PID, On/Off |
| Power Supply | 100-240V AC |
| Operating Temperature | 0°C to 50°C |
Details the process of physically mounting the device into a control panel.
Explains the use of fixing screws for securing the unit during installation.
Provides a visual map of how to navigate through the device's user interface pages.
Explains the function of shortcut buttons for quick access to specific device pages.
Details the procedure for modifying parameter values using the device interface.
Provides an overview of the device's various screens, parameters, and their functions.
Shows system status screens, including temperature and ventilation settings.
Details how to monitor and reset feed consumption data for specific models.
Explains how to view and interpret weighing data logs for EPC 4 devices.
Covers monitoring and resetting electricity consumption data for EPC 4.
Details how to monitor and reset water consumption data for EPC 4.
Allows adjustment of setpoint values for temperature, humidity, and ventilation.
Introduces the shutter function and its associated parameters.
Configures feeding schedules, amounts, and timings for EPC 3&4.
Sets up lighting schedules, durations, and analog output levels.
Covers alarm configuration, including set values and types.
Allows setting minimum, maximum, and differential alarm thresholds.
Displays the current status of all configured alarms (on or off).
Allows configuration of how external factors influence ventilation and temperature control.
Introduces the curve function for day-by-day parameter adjustment.
Configures feeding parameters for each step within a programmed curve.
Sets lighting parameters for each step within a programmed curve.
Details parameters and functions for controlling the first heating element.
Details parameters and functions for controlling the second heating element.
Details parameters and functions for controlling the cooling system.
Details parameters and functions for controlling humidity levels.
Covers parameters and functions for managing ventilation systems.
