EMKO EPC-1 - 6.3 EDITING A PARAMETER AND CHANGING A PAGE; 6.4 SCREENS PARAMETERS AND FUNCTIONS; 6.4.1 TECHNICIAN PASSWORD

6.3 EDITING A PARAMETER AND CHANGING A PAGE
1. Sample display:
2. Push button. The parameter is selected.
3. Push or buttons to edit parameter.
Parameter has changed.
4.a. Push button to save the parameter and go to the next parameter.
4.b. Push button to cancel.
SHUTTER PARAMETERS
STROKE TIME: 100SEC
STEP : 0.1%
SHUTTER PARAMETERS
STROKE TIME: SEC
STEP : 0.1%
100
SHUTTER PARAMETERS
STROKE TIME: SEC
STEP : 0.1%
90
SHUTTER PARAMETERS
STROKE TIME: 90SEC
STEP : %0.1
SHUTTER PARAMETERS
STROKE TIME: 100SEC
STEP : 0.1%
Changing a page
There are two ways to pass to another page;
1. Use or button if any parameter is not selected.
2. Use button if the last parameter of the page is selected.
48
TECHNICIAN
PASSWORD
0000
TECHNICIAN PASSWORD: Password value (Range: 0 - 9999).
This page is used to access to technician parameters pages.
6.4.1 TECHNICIAN PASSWORD
6.4 SCREENS PARAMETERS AND FUNCTIONS