EMKO EPC-1 - 6.4.13 WEIGHT (EPC 4,EPC 4 A)

TARE: Tare adjustment parameter (Range: NO- YES / Factory Setting: NO).
REF WEIGHT: Reference weight value is used to make weight calibration
(Range: 0 KG- 5000 KG / Factory Setting: 5000 KG).
TAKE REF WEIGHT: Reference Weigh adjustment parameter
(Range: NO- YES / Factory Setting: NO).
LOAD: Active feed weigh reading (Range: -5000 KG - 5000 KG ).
WEIGHT1 CALIBRATION
TARE: NO
REF WEIGHT: 5000GR
TAKE REF WEIGHT: NO
5000GR
6.4.13.1 WEIGHT1 ADJUSTMENT (EPC 4, EPC 4A)
LOAD
WEIGHT2 CALIBRATION
TARE: NO
REF WEIGHT: 5000GR
TAKE REF WEIGHT: NO
5000GR
6.4.13.2 WEIGHT2 ADJUSTMENT (EPC 4, EPC 4A)
LOAD
WEIGHT3 CALIBRATION
TARE: NO
REF WEIGHT: 5000GR
TAKE REF WEIGHT: NO
5000GR
6.4.13.3 WEIGHT3 ADJUSTMENT (EPC 4)
LOAD
6.4.13 WEIGHT (EPC 4,EPC 4A)
73
TARE: Tare adjustment parameter (Range: NO- YES / Factory Setting: NO).
REF WEIGHT: Reference weight value is used to make weight calibration
(Range: 0 KG- 5000 KG / Factory Setting: 5000 KG).
TAKE REF WEIGHT: Reference Weigh adjustment parameter
(Range: NO- YES / Factory Setting: NO).
LOAD: Active feed weigh reading (Range: -5000 KG - 5000 KG ).
TARE: Tare adjustment parameter (Range: NO- YES / Factory Setting: NO).
REF WEIGHT: Reference weight value is used to make weight calibration
(Range: 0 KG- 5000 KG / Factory Setting: 5000 KG).
TAKE REF WEIGHT: Reference Weigh adjustment parameter
(Range: NO- YES / Factory Setting: NO).
LOAD: Active feed weigh reading (Range: -5000 KG - 5000 KG ).