EMKO EPC-1 - 6.4.17 MODBUS

BAUD RATE: Communication Baud Rate
(Range: 0- 4(0: 1200- 1: 2400- 2: 4800- 3: 9600- 4: 19200 baud rate) / Factory Setting: 3).
STOP BIT: Communication Stop Bit Selection
(Range: 0- 1(0: 1 stop bit- 1: 2 stop bits) / Factory Setting: 0).
PARITY BIT: Communication Parity Selection
(Range: 0- 2(0: None parity- 1: Odd parity- 2: Even parity) / Factory Setting: 0).
SLAVE ID: Communication Slave Adress Selection
(Range: 1- 247 / Factory Setting: 1).
CONNECTION: Communication Port Selection. (’1’ for Rs232, ‘2’ for Rs485)
(Range: 1- 2 / Factory Setting: 1).
6.4.17 MODBUS
MODBUS
BAUD RATE : 3
STOP BIT : 0
PARITY BIT: 0
SLAVE ID : 1
CONNECTION: 1
TECHNICIAN: Technician password set value
(Range: 0- 9999 / Factory Setting: 0).
USER: User password set value
(Range: 0- 9999 / Factory Setting: 0).
EDIT PASSWORDS
TECHNICIAN: 0000
USER : 0000
6.4.18 EDIT PASSWORDS
PASSWORD PARAMETER: Factory Adjustment field password query
IMPORTANT: UNAUTHORIZED ACCESSING TO ADJUSTMENT PAGES MAY EFFECT
EPC’S WORKING EFFORT.
EMKO HAS NO RESPONSIBILITY, IF CUSTOMER ACCESSES TO ANALOG ADJUSTMENT PAGES
ENTER CAL
PASSWORD
0000
6.4.19 ENTER CAL PASSWORD
82