EMKO EPC-1 - Feeding Examples (Epc 3&4)

6.4.12.7 FEEDING EXAMPLES (EPC 3&4)
Example 1;
FEED UNIT PARAMETERS PAGE UNIT parameter: WEIGHT
FEEDING CONSUMPTION PAGE TOTAL CONSUMPTION
parameter: 6500 kg
Consumption feed in last step: 1500 kg
After F1 step finished, new value of
FEEDING CONSUMPTION PAGE TOTAL CONSUMPTION
parameter is;
6500 + 1500= 8000 kg
Example 2;
FEED UNIT PARAMETERS PAGE UNIT parameter: TIME
FEED UNIT PARAMETERS PAGE FOOD PER MIN
parameter: 50.0 kg
Duration: 1500/50.0 = 30min
FEEDING CONSUMPTION PAGE TOTAL CONSUMPTION
parameter: 6500 kg
After F1 step finished, new value of
FEEDING CONSUMPTION PAGE TOTAL CONSUMPTION
parameter is;
6500+1500 = 8000 kg
FEEDING PARAMETERS
F1: 06:00 1500
F2: 10:00 6000
F3: 12:00 6000
F4: 19:00 6000
F5: 22:00 9000
HR:MN FEED<KG>
Start Time Feed Amount
Working without curve:
These paramaters are used;
Working with curve:
These paramaters are used;
- SET VALUES PAGE DAY < CURVE STEP2 DAY, FEEDING PARAMETERS PAGE step1 parameters are
used,
- CURVE STEP2 DAY<=SET VALUES PAGE DAY < CURVE STEP3 DAY, FEEDING PARAMETERS PAGE
step2 parameters are used,
- CURVE STEP3 DAY<=SET VALUES PAGE DAY < CURVE STEP4 DAY, FEEDING PARAMETERS PAGE
step3 parameters are used,
- CURVE STEP4 DAY<=SET VALUES PAGE DAY < CURVE STEP5 DAY, FEEDING PARAMETERS PAGE
step4 parameters are used,
- CURVE STEP5 DAY<=SET VALUES PAGE DAY < CURVE STEP6 DAY, FEEDING PARAMETERS PAGE
step5 parameters are used,
- CURVE STEP6 DAY<=SET VALUES PAGE DAY < CURVE STEP7 DAY, FEEDING PARAMETERS PAGE
step6 parameters are used,
- CURVE STEP7 DAY<=SET VALUES PAGE DAY < CURVE STEP8 DAY, FEEDING PARAMETERS PAGE
step7 parameters are used,
- CURVE STEP8 DAY<=SET VALUES PAGE DAY < CURVE STEP9 DAY, FEEDING PARAMETERS PAGE
step8 parameters are used,
- CURVE STEP9 DAY<=SET VALUES PAGE DAY < CURVE STEP10 DAY, FEEDING PARAMETERS PAGE
step9 parameters are used,
- CURVE STEP10 DAY<=SET VALUES PAGE DAY, FEEDING PARAMETERS PAGE step10 parameters
are used.
FEEDING PARAMETERS
F1: 00:00 0
F2: 00:00 0
F3: 00:00 0
F4: 00:00 0
F5: 00:00 0
HR:MN FEED<KG>
FEEDING PARAMETERS
CURVE STEP X
F1: 00:00 0
F2: 00:00 0
F3: 00:00 0
F4: 00:00 0
F5: 00:00 0
HR:MN FEED<KG>
FEED UNIT PARAMETERS
UNIT : TIME
FEED PER MIN: 50.0KG
TARE : NO
REF WEIGHT : 250KG
TAKE REF WEIGHT: NO
FEED OFFSET : 0KG
72