ELECTRICITY: Electricity consumption per pulse
(Range: 0 WH/Pulse - 9999 WH/Pulse / Factory Setting: 1000 WH/Pulse).
WATER: Water consumption per pulse
(Range: 0.00 LT/Pulse - 99.99 LT/Pulse / Factory Setting: 0.10 LT/Pulse).
WATER AND ELECTRICITY
CONSUMPTION PER PULSE
ELECTRICITY: 1000WH/P
WATER : 0.10LT/P
6.4.14.1 WATER AND ELECTRICITY CONSUMPTION PER PULSE (EPC 4, EPC 4A)
ELECTRICITY ENERGY
CONSUMPTION
03.07.06 02:11:27
RESET CONSUM: NO
DAILY CONSUM: 15KWH
TOTAL CONSUM: 5018KWH
DAY NUMBER : 12
6.4.14.2 ELECTRICITY CONSUMPTION (EPC 4, EPC 4A)
EPC has an electricity consumption input which is called “ELECTRICITY” digital input.
Consumption increases as many WATER AND ELECTRICITY CONSUMPTION PER PULSE PAGE
ELECTRICITY as each pulse
Example:
ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM : 0 KWH
ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM : 23000 KWH
WATER AND ELECTRICITY CONSUMPTION PER PULSE PAGE ELECTRICITY : 2000 WH/Pulse
Pulses = 2500,
2500*2000 = 5000000 WH,
5000000/1000 = 5000 KWH.
ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM : 5000 KWH
ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM : 23000 + 5000 = 28000 KWH
TO RESET DAILY CONSUM AND TOTAL CONSUM PARAMETERS
To switch curve from NO to YES will reset ELECTRICITY ENERGY CONSUMPTION PAGE DAILY
CONSUM and ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM parameters.
To switch ELECTRICITY ENERGY CONSUMPTION PAGE RESET CONSUM from NO to YES and
pushing button will reset ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM and
ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM parameters.
ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM parameter value is added to
ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM parameter and cleared at each new day.
WATER AND ELECTRICITY
CONSUMPTION PER PULSE
ELECTRICITY: 1000WH/P
WATER : 0.10LT/P
6.4.14 WATER AND ELECTRICITY CONSUMPTION (EPC 4, EPC 4A)
78
To Next Page
Loading...
