ELECTRICITY ENERGY
CONSUMPTION
03.07.06 02:11:27
RESET CONSUM: NO
DAILY CONSUM: 15KWH
TOTAL CONSUM: 5018KWH
DAY NUMBER : 12
DATE: The unit shows current date (day.month.year).
TIME: The unit shows current time (hour.minute.second).
RESET CONSUM: Reset DAILY CONSUM and TOTAL CONSUM parameters
(Range: NO- YES / Factory Setting: NO).
DAILY CONSUM: Daily electricity consumption (Kwh).
TOTAL CONSUM: Total electricity consumption (Kwh) at the active curve.
DAY NUMBER: Day Number.
Curve enable event will reset ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM and
ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM parameters.
To switch ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM to enabled from disabled and
pushing button will reset ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM and
ELECTRICITY ENERGY CONSUMPTION PAGE TOTAL CONSUM parameters.
ELECTRICITY ENERGY CONSUMPTION PAGE DAILY CONSUM parameters is reset at each equinox.
5.4.5 ELECTRICITY ENERGY CONSUMPTION (EPC 4)
WATER CONSUMPTION
03.07.06 02:11:27
RESET CONSUM: NO
DAILY CONSUM: 430LT
TOTAL CONSUM: 15316LT
DAY NUMBER : 12
DATE: The unit shows current date (day.month.year).
TIME: The unit shows current time (hour.minute.second).
RESET CONSUM: Reset DAILY CONSUM and TOTAL CONSUM parameters
(Range: NO- YES / Factory Setting: NO).
DAILY CONSUM: Daily water consumption (Liter).
TOTAL CONSUM: Total water consumption (Liter).
DAY NUMBER: Day Number (Read only).
To reset WATER CONSUMPTION PAGE DAILY CONSUM and
WATER CONSUMPTION PAGE TOTAL CONSUM parameters, please change
WATER CONSUMPTION PAGE RESET CONSUM parameter from NO to YES and push button,
after that the WATER CONSUMPTION PAGE DAILY CONSUM and
WATER CONSUMPTION PAGE TOTAL CONSUM parameters will reset and
WATER CONSUMPTION PAGE RESET CONSUM parameter will change from YES to NO.
Also, curve enable event will reset WATER CONSUMPTION PAGE DAILY CONSUM and
WATER CONSUMPTION PAGE TOTAL CONSUM parameters.
5.4.6 WATER CONSUMPTION (EPC 4)
25
To Next Page
Loading...
