6
7
10
8
5
6
9
5
How to use the UniQ 310 chassis
• To make the folded chassis even more compact, remove the
wheels by pressing the wheel hub release buttons and removing
the wheels from the axles.
IMPORTANT
• Remove any dirt from the axle stubs before reattaching the wheels.
• The chassis can now be folded down completely. You can operate
the height adjustable handle to minimize the folded dimensions of
the chassis.
How to adjust the height of the handle
• Adjust the height of the handle by pressing in both of the grey but-
tons simultaneously which are located on the outside of the handle
(5). Whilst keeping the buttons depressed, adjust the handle up-
wards or downwards to the desired position (6).
• To achieve the most comfortable pushing position, the handle height
should be adjusted so that your hands rest on the handle and you
do not push the handle down when you are walking.
Assembly of the tray
• The tray is already assembled on the chassis but can be removed
for washing. See washing instructions under the Care and Mainte-
nance section.
• The tray can be removed by undoing the poppers.
Folded chassis with the wheels removed.
IMPORTANT
• Clean the axle stubs before reattaching the wheels.
This section applies to UniQ 310 chassis
112
Manual Duo Combi UniQ 310 v 1.6
To Next Page
Loading...
