emmeti CTUP - Advanced Programming; Regulation Type (Winter)

English
- 48 -
Chronothermostat with Humidistat User Manual
ADVANCED PROGRAMMING
• In advanced programming it is possible to access the following operation
parameters:
- regulation temperature type
- parameters for regulation temperature type
- antifreeze temperature
- temperature measurement unit
- humidistat operation
- humidistat set point
- humidistat differential
- keypad lock password
- system operation hours
- battery charge status
• Field (22) will display the writing "rEG="
and on field (16) letter "O" (ON-OFF
programming) or "P" (proportional
programming) will flash.
• To enter advanced programming, press
the "PRG" key for more than 3 seconds.
The parameter to be modified will flash;
using
" " and " " it is possible to
modify its value. Use
" " to confirm
the setting and move on to the next
parameter. Once the last parameter has
been confirmed, you will exit the menu
and the instrument will restore operation
with the previously set operation.
Regulation type (only for winter operation)