emmeti CTUP - Battery Status and Automatic Time Change

English
- 53 -
Chronothermostat with Humidistat User Manual
Battery charge status
It is possible to view the battery charge status.
Field (22) will display the writing "BAT="
and field (16) will show the percentage
value of the charge level.
Since this is the last parameter of the
sequence, pressing the
" " key will
exit the menu and return to automatic
operation.
If no key is pressed during setting of
these parameters, automatic operation
will be restored after 45 seconds.
ADVANCED FUNCTIONS
Automatic change CET / DST
The instrument allows to automatically move from the CET (Central European Time)
to DST (Daylight Saving Time) and vice versa.
Holding the "
" key for at least 3
seconds, the display will show the writing
"Change" and field (15) will flash the
writing "On" or "OFF".
Choose using the
" " or " " keys and
confirm with
" " .
If the choice is OFF, you will exit the menu
and the instrument will not execute the
time change. If the choice is ON, then
two other menus will be displayed, which
define respectively the time change from
- winter  summer
- summer  winter (on field (20) the " " symbol will appear)