Need help?Do you have a question about the Emotiva Ultra UPA-1 and is the answer not in the manual?
General| Frequency Response (+/- 0.1dB) | 20 Hz - 20 kHz |
|---|---|
| Signal-to-Noise Ratio (SNR) | > 100 dB |
| S/N Ratio | > 100 dB |
| Input Sensitivity | 1.5 V |
| Input Sensitivity for full output | 1.5 V |
| Input Impedance | 10 kOhms |
| Damping Factor | > 100 |
| Gain | 29 dB |
| Dimensions | 17.5" x 3.5" x 14.5" |
| Weight | 25 lbs |
| Power Output (8 Ohms) | 200 Watts |
| Power Output (4 Ohms) | 300 Watts |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.007% |
| THD+N | <0.03% |
Covers placement, ventilation, power handling, and service requirements.
Guidelines for safe use of polarized plugs and grounding.
Critical warnings regarding electric shock, fire, and moisture hazards.
Explains the difference and Emotiva's rating methodology.
Discusses power socket ratings, current requirements, and surge protection.
Guidance on optimal placement for cooling and heat management.
How to wire speakers in series and calculate impedance.
How to wire speakers in parallel and calculate impedance.
Steps to diagnose and resolve lack of audio output from speakers.
Troubleshooting amplifier shutdowns and circuit breaker trips.
Diagnosing and fixing issues with bass response from speakers.
Explains meaning of blinking red lights and fault conditions.
To Next Page
