5
The Modes in Detail
Normal Mode
This is the standard digital delay type operation, known and loved by all. In
Normal Mode the tap switch, when pressed, mutes the wet signal for one ‘delay
time’ period. This is useful if you’re using a high feedback setting; you can press
the tap switch when you change chords to avoid dissonance from the feedback
of the previous chord ringing over the current chord.
Sub-mode A – Short Delay
In sub-mode A the d time | ratio knob varies the delay time between
5.5ms and 95ms.
Sub-mode B – Medium Delay
In sub-mode B the d time | ratio knob varies the delay time between
45ms and 800ms
Sub-mode C – Long Delay
In sub-mode C the d time | ratio knob varies the delay time between
700ms and 2.8 seconds.
To Next Page
Loading...
