EMS AIR-FLOW MASTER Perio - PERIO-FLOW Mode Detection

38
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
PERIO-FLOW mode detection
The PERIO-FLOW mode is automatically selected when the handpiece used with the AIR-FLOW
PERIO+PLUS powder chamber is lifted from its support.
Press the "working mode selection" switch to return to AIR-FLOW mode when the AIR-FLOW
handpiece is used.
FB-580_CN_rev_B_01_Not Util AIR-FLOW MASTER.indd 38 13.10.2017 09:59:38