EasyManua.ls Logo

EMS AIR-FLOW MASTER Perio - Page 6

EMS AIR-FLOW MASTER Perio
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
亲爱的客户:
感谢您购买新款 EMS 产品。 本系统符合最高的质量和安全标准。
您的 AIR-FLOW MASTER 由两个空气抛光装置组成。
适用于使用 EMS AIR-FLOW 系统的牙科诊所。
本产品配合 EMS 提供的牙粉及系统使用。
通过喷水口对牙粉的限制,可以非常精确地控制喷水量,从而可确保您的
患者得到满意的治疗。
该产品主要用于去除牙齿表面、牙窝沟、牙槽内的牙斑、牙渍。
应用
• 去除牙菌斑,以便注入窝沟封闭剂,
• 黏合/粘固镶嵌物、填补物、牙冠和贴面之前进行牙齿表面预备,
• 放置复合修复体之前进行牙齿表面预备,
• 黏合正畸托架之前进行清洗,
• 为正畸患者有效去除牙菌斑和牙垢,
• 装 入前 清 洗 植 入 牙 固定 装 置,
• 去 除 牙 垢,以 确 定 阴 影 位 置,
• 使用氢氟酸盐进行治疗之前,先清除牙菌斑,
• 执行牙齿美白程序之前,先清除牙菌斑和牙垢。
DEAR CUSTOMERS,
Thank you for buying a new EMS product. It meets the highest quality
and safety standards.
Your AIR-FLOW MASTER is a combination of two air polishing units.
It is for use in dentistry with EMS AIR-FLOW systems.
This product functions with the powders and the systems supplied by EMS.
The connement of the powder by a water jet makes it possible to steer
the water jet with great precision and thus ensures a pleasant treatment
for your patient.
This product removes dental plaque, soft deposits and surface stains
from pits, grooves, interproximal spaces or smooth surfaces of the teeth.
Applications
• Plaque removal for placement of sealants,
• Surface preparation prior to bonding/cementation of inlays, onlays,
crowns and veneers,
• Surface preparation prior to placing composite restorations,
• Cleaning prior to bonding of orthodontic brackets,
• Effective plaque and stain removal for orthodontic patients,
• Clean implant xture prior to loading,
• Stain removal for shade determination,
• Plaque removal prior to uoride treatment,
• Plaque and stain removal prior to whitening procedure.
FB-580_CN_rev_B_01_Not Util AIR-FLOW MASTER.indd 6 13.10.2017 09:57:29

Table of Contents