EMS AIR-FLOW MASTER PIEZON - Cleaning the Powder Chamber

86
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
Cleaning the Powder Chamber
Unscrew the dome and pull out the powder diffuseur.
Regularly clean this part.
The cap and the powder diffuseur must be absolutely dry before reassembling.
Do not switch both powder diffusers during the reassembling.
Do not use needles to clean the powder chamber valve (risk of perforation)
FB-581_CN_rev_B_AIR-FLOW Master Piezon.indd 86 13/09/2018 16:20:05