70
Standard
Cleaning
Perio
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
Purge switch and mode
The purge switch allows the depressurization of the powder chamber for safe removal and to repres-
surize the chamber once it is back on the unit.
A beep sound will be emitted when the purge switch is pressed. After approximately 1 minute the unit
will return to its previous conguration (or when pressing the switch a second time).
The purge switch also controls the "Cleaning" function (see following pages).
FB-581_CN_rev_B_AIR-FLOW Master Piezon.indd 70 13/09/2018 16:19:42