EMS AIR-FLOW MASTER PIEZON - Filling the Powder Chambers

54
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
PERIO+PLUS
POWDERS
ONLY
®
Filling the powder chambers
Make sure that the powder chambers are absolutely dry. Moisture can cause the powder to cake
and provoke a blocking of the circuit.
To avoid clogging the unit do not ll the powder chambers above the line "Max". Pour the powder
into the AIR-FLOW CLASSIC+SOFT powder chamber. The AIR-FLOW PERIO+PLUS powder chamber
having a different design, as shown.
Put the powderdiffuser back to its position as soon as you nish to ll the powder chamber.
Use only powder provided by EMS and corresponding to the application.
Close correctly the bottle after use. The conditions of storage are described in the chapters "Storing
the product" and "Technical data".
FB-581_CN_rev_B_AIR-FLOW Master Piezon.indd 54 13/09/2018 16:19:25