EMS AIR-FLOW MASTER PIEZON - Operating the Unit; Switching on

60
Standard
Cleaning
Perio
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
Standard
Cleaning
Perio
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
Standard
Cleaning
Perio
ON
Operating the unit
When the unit is turned on, the control lamps light up and then the unit returns to its previous congu-
ration and the powder chamber is under pressure.
Before treating the patient, rinse the eventual residues of the disinfecting solution used by the
Piezon system out of the circuit of the AIR-FLOW system. Put the handpiece above a sink and press
the foot pedal.
After 15 min. of inactivity, the unit switches to standby mode. Placing a nger on the touch-sensitive
zone wakes the unit from standby mode. The unit returns to its previous conguration.
Switching On
FB-581_CN_rev_B_AIR-FLOW Master Piezon.indd 60 13/09/2018 16:19:35