EasyManua.ls Logo

EMS PIEZON 150 - Reprocessing

EMS PIEZON 150
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
135°C
REPROCESSING
The instruments, CombiTorque, handpidece holder, and handpiece supplied with the Piezon 150
and Piezon 250 must be cleaned and sterilized before the rst use. Reusable accessories must be
cleaned and sterilized following each use. A listing of the reusable accessories is provided in the table
below. Diamond-coated instruments are indicated for single use only and must not be reused.
Follow present-day regulations enforced in the country about reprocessing.
Clean the exterior surfaces of the unit only with an alcohol-based, commercially available (ethanol,
isopropanol), colorless disinfectant. The use of scouring powder or an abrasive sponge will damage its
surface.

Table of Contents

Related product manuals