EMSI FLEX-MT PLUS - Unit Description; Unit Controls Overview

10
7.0 | Unit Description
ON/OFF Button: Turns the unit ON and OFF.
Amplitude Controls: Controls the “INTENSITY” level of stimulating pulses.
MODE Button: Choose the TENS or EMS stimulation modes.
SET Button: Set the pulse width, pulse rate, ramp time, on time and o time.
TIMER Button: Sets the timer.
INCREASE & DECREASE Button: Increase and decrease pulse width, pulse rate, ramp time, on
time, o time and choose the timer.
LOCK/UNLOCK Button: Locks or unlocks the unit.
Symmetric/Asymmetric Button: Choose symmetric or asymmetric waveform.