EMSI FLEX-MT PLUS - Adverse Reactions; Skin Irritation and Allergic Reactions; Electromagnetic Disturbances

9
8. Eectiveness is highly dependent upon patient selection by a person qualified in the management
of pain patients.
9. If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation
amplitude to a comfortable level and contact your physician if problems persist.
6.0 | Adverse Reactions
1. Possible skin irritation or electrode burn under the electrodes may occur.
2. Possible allergic skin reaction to tape or gel may occur.
3.
transmitters, e.g. mobile phones or similar mobile radio equipment, airport security systems, or
metal detection devices (which themselves conform to the EMC regulations), may influence the
proper functioning of the device if such equipment is operated in close proximity and with relatively
high transmitting power.
Flex-MT® Plus meets EMC requirements and is designed in such a way, that under normal conditions,
there is no risk of malfunction caused by electromagnetic interference. However, in the case of signals
from high frequency transmitters, the risk of electromagnetic incompatibility when operated in close
proximity to electronic apparatus cannot be totally ruled out. In unusual circumstances, unintended
functions of the Flex-MT® Plus could be initiated, possibly giving rise to undesirable risks for the patie
nt or
user such as a surge in energy level or ineective treatment parameters.