7.0 | Unit Description continued
Function Mark
Electrode Leadwires: Two sets of 1100mm (43 inch)
electrode leadwires which are compatible with commercially
available electrodes (standard 0.08 inch female connection)
are provided with the
Flex-MT® Plus. Each output jack of
the device is designed to accept a lead wire whose connector
complies with FDA 21 CFR Part 898 requirements.
e
Flex-MT® Plus is recommended for use with
the previously cleared Everlife self adhesive
electrodes. (Re-order information on page 26)
Battery Charger:
Input: AC 110V, 50~60Hz, 0.2A
Output: DC 4.8V, 400mA
Accessories
12
To Next Page
Loading...