MVP D-TEK™ Operating Instructions 2
Document no. 10000104
This product is an accessory or part of a system. Always read and follow the manufacturer’s
instructions for the equipment you are connecting this product to. Comply with all applicable
codes and safety regulations. Failure to do so may result in damage, injury or death!
The MVP D-TEK
TM
Vehicle Loop Detector allows for detection of metallic objects entering into the field
formed around the detection loop. We have designed the MVP D-TEK with the following objectives in
mind:
1. Compact package to allow easy installation into small operator housings.
2. All controls are accessible from the outside for easy installation and operation.
3. Integral loop conditioner is provided, to enable detector operation with marginal loops.
4. Provide all features and controls necessary for a variety of applications.
5. Use metal housing for maximum durability and RF resistance.
6. Provide maximum surge protection on all inputs and outputs of the detector.
We took extra care to achieve and exceed these objectives. For example the controls are divided into
two groups. The group on the front of the detector is for basic operation and the group on the back of
the detector is for advanced settings. This way the more advanced settings are not visible to the casual
user.
The D-TEK is made from aircraft quality anodized aluminum and all switches have gold plated contacts
that are sealed for protection. The circuit is protected by an advanced thermal resettable fuse,
snubbing circuitry on the relay contacts, Metal Oxide Varistor on the power input and triple protection
on the loop input.
The D-TEK features are extensive and include full loop diagnostic with frequency counter, 10 sensitivity
settings, delay and extend features, :fail safe and “fail secure” operation, automatic sensitivity boost,
pulse or two presence relay operation and more.
To Next Page
Loading...
