Need help?Do you have a question about the ENACFIRE G10 and is the answer not in the manual?
Instructions for initial pairing of earphones using the charging case.
Instructions for pairing earphones without using the charging case.
Tap the earphone once to answer or end an incoming call.
Touch the earphone for 2 seconds to reject an incoming call.
Tap the earphone once to pause or play music.
Tap the earphone three times to activate the voice assistant.
Double-tap the earphone to skip to the previous or next song.
Touch and hold the earphone to increase or decrease volume.
Turn off Bluetooth or touch an earphone for 8 seconds to power off.
Instructions for using a single earphone without the charging case.
Earphone LED status and approximate charging time.
Case LED indicators for battery capacity and charging time.
To Next Page
General
