Need help?Do you have a question about the ENACFIRE G20 and is the answer not in the manual?
How to power on and pair earphones using the charging case.
How to power on and pair earphones when used separately.
Instructions for managing incoming calls via earphone buttons.
How to pause/play music and activate the device's voice assistant.
Navigate songs and adjust volume levels using earphone controls.
Method to power off earphones by placing them in the charging case.
How to power off earphones when not in the charging case.
Explains LED indicators for earphone charging status.
Explains LED indicators for the charging case battery level.
The ENACFIRE G20 are true wireless stereo headphones designed for a seamless audio experience. These earphones offer a range of functionalities for both music playback and call management, along with intuitive pairing and charging processes.
The ENACFIRE G20 headphones are primarily designed for wireless audio playback and hands-free calling. They operate as true wireless stereo headphones, meaning the left and right earphones function independently while also being able to pair with each other for stereo sound. The device supports Bluetooth connectivity, allowing it to pair with various smart devices. Each earphone features a multifunctional button that controls various operations, including power, pairing, call management, music playback, and voice assistant activation. The earphones come with a charging case that not only protects them but also recharges them on the go.
There are two main approaches to power on and pair the ENACFIRE G20 earphones.
Approach 1 - With Charging Case: To power on, simply take the earphones out of the charging case. A blue light will illuminate on the earphones, indicating they are powered on. For pairing, the earphones will automatically enter pairing mode once removed from the case. The right earphone, which acts as the master earphone, will flash blue and white lights alternately. To connect to a device, select 'ENACFIRE G20' from the device's Bluetooth list.
Approach 2 - Earphones Standalone: To power on the earphones without the charging case, touch the multifunctional buttons on both earphones for 1 second. Release the button when you hear the prompt sound 'Power on' and observe a blue light on the earphones. Similar to the first approach, the earphones will automatically start pairing, with the right earphone flashing blue and white lights alternately. Connect by selecting 'ENACFIRE G20' from your device's Bluetooth list. It's important to remember that the right earphone is designated as the master earphone.
The ENACFIRE G20 earphones provide straightforward controls for managing incoming calls.
Answer Call / End Call: To answer or end an incoming call, simply tap either the Left or Right multifunctional button once.
Reject Call: To reject an incoming call, touch and hold either the Left or Right multifunctional button for 2 seconds.
Controlling music playback is intuitive with the multifunctional buttons.
Pause / Play: To pause or play music, tap either the Left or Right multifunctional button once while in music mode. (Note: Some phones may require a media player to be started first).
Next Song: To skip to the next song, double-tap the Right multifunctional button.
Previous Song: To go back to the previous song, double-tap the Left multifunctional button.
Adjust Volume: To adjust the volume, touch and hold the Left multifunctional button to decrease the volume, and touch and hold the Right multifunctional button to increase the volume. A 'Beep' sound will be produced when the volume reaches its minimum or maximum level. It's important to note that these volume adjustment functions are not supported when only one earphone is used in single mode.
The earphones allow for quick access to your device's voice assistant. To launch the voice assistant, tap either the Left or Right multifunctional button three times. You will hear a 'Beep' prompt sound confirming activation.
There are two methods to power off the ENACFIRE G20 earphones.
Mode 1 (With Charging Case): The simplest way to power off the earphones is to place them back into the charging case. They will automatically power off. If only the Left earphone is placed into the charging case, the Right earphone will remain connected. Conversely, if only the Right earphone is placed into the charging case, the Left earphone will disconnect and begin pairing.
Mode 2 (Earphones Standalone): To power off the earphones manually, first turn off Bluetooth on your connected device to disconnect the earphones. Then, touch either one of the multifunctional buttons for 8 seconds. This will power off the earphones.
The ENACFIRE G20 earphones can also be used in single mode, where only one earphone is connected to your device.
Step 1: To initiate single mode, first turn off Bluetooth on your device and power off both earphones by touching their multifunctional buttons for 8 seconds.
Step 2: To use the Right earphone in single mode, touch the Right button for 4 seconds until blue and white lights flash alternately. Release when you hear 'Pairing'. To use the Left earphone in single mode, touch the Left button for 4 seconds until blue and white lights flash alternately. Release when you hear 'Pairing'.
Step 3: Once in pairing mode, select 'ENACFIRE G20' from your device's Bluetooth list. Note that there will be two 'ENACFIRE G20' Bluetooth names for the Left and Right earphones; select the one corresponding to the earphone you wish to use.
Proper charging ensures the longevity and performance of your ENACFIRE G20 earphones and charging case.
Earphones Charging Status: When the earphones are placed in the charging case, the leftmost LED light flashing indicates the Left earphone is charging, and the rightmost LED light flashing indicates the Right earphone is charging. Once fully charged, the LED lights will turn off. It takes approximately 1.5 hours to fully charge the earphones.
Charging Case Charging Status: The LED lights on the charging case indicate the remaining battery capacity. Different combinations of lights represent 1/4, 2/4, 3/4 battery left, or a fully charged case. It takes about 1.5-2 hours to fully charge the charging case.
If both earphones fail to pair with each other or if you encounter other connection-related issues, follow these steps:
To ensure safe and proper use of the ENACFIRE G20 earphones, adhere to the following guidelines:
General| Wireless | Yes |
|---|---|
| Bluetooth Version | 5.0 |
| Battery Life (earbuds) | 6 hours |
| Battery Life (charging case) | 24 hours |
| Water Resistance | IPX7 |
| Charging Case | Yes |
| Driver Size | 6mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16Ω |
| Sensitivity | 95dB |
| Charging Time (earbuds) | 1.5 hours |
| Charging Time (charging case) | 2 hours |
| Type | True Wireless |
To Next Page
