Need help?Do you have a question about the ENACFIRE Future Plus and is the answer not in the manual?
Earphones power on automatically when removed from the charging case.
Press and hold the multifunction button for 2 seconds to power on manually.
Earphones auto-pair; L earphone enters pairing mode for device connection.
Pair earphones manually if the charging case is unavailable.
Earphones disconnect and power off if phone Bluetooth is disabled.
Earphones power off after 5 min if exceeding effective connection range.
Single press of left earphone multifunction button answers or ends calls.
Double press of left earphone multifunction button rejects calls.
Single press of multifunction button pauses or plays music.
Double press R earphone multifunction button to play next song.
Double press L earphone multifunction button to play previous song.
Steps to activate mono mode using one earphone and Bluetooth pairing.
Steps to activate stereo mode by pairing both earphones.
Earphones shut down automatically when placed in the charging case.
Press and hold the multifunction button for 4 seconds to power off manually.
Place earphones in case; LED stays white while charging, off when full.
LED status indicates battery level; charge case when first LED flashes.
To Next Page
General
