ENCLO EC18017 - Attach Ground Stakes; Attach Bottom Rail

www.encloscreens.com
ASSEMBLY INSTRUCTIONSEC18017 / EC18018
8
STEP 3.5
1
1. Insert (2) Ground Stakes (F) up the post until the lower
pre-drilled holes in the anchors align with the lowest
pre-drilled hole in the posts.
2. Drive (2) total 1” black steel screws into the upper pre-
drilled holes in the posts as shown below.
2
Align
1. Insert (1) rail up the posts until the pre-
drilled holes in the rail align with the
lowest pre-drilled hole in the posts.
2. Drive (2) total 1” black stainless steel
screws into the lower pre-drilled holes
in the posts as shown below.
STEP 5.3STEP 3.6
1
2
Align
F