Need help?Do you have a question about the ENCLO EC18017 and is the answer not in the manual?
General| Brand | ENCLO |
|---|---|
| Model | EC18017 |
| Category | Fencing & Gates |
| Language | English |
Check the inside of larger pieces in your box for other materials packed inside.
Position posts so pre-drilled holes face forward and open channels face each other.
Slide rail into post channels and secure with screws into pre-drilled holes.
Insert spacers into posts, then narrow boards into channels until they hit spacers.
Add remaining narrow boards and wide boards, ensuring a spacer between each.
Insert ground stakes into posts and secure with screws into upper pre-drilled holes.
Insert rail into posts and secure with screws into lower pre-drilled holes.
Repeat steps 3.1-3.6 to assemble the second screen.
Move screen to location, push into ground until 14" stake is inserted, and ensure leveling.
Use auger bit, add water, and hammer post with wood block for hard ground.
Connect screens using joiner clips and screws for straight or corner applications.
Insert the Post Caps over the tops of the posts to complete the assembly.
To Next Page
