www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS ZP19014
b Using a piece of 2x4 (or
equivalent), attempt to
manually push the ground
stake 12" into the ground.
You can also lightly tap the
top of the stake or the top
of the 2x4 with a hammer.
Repeat for the other ground
stake.
b Fasten both ground stakes to the left and right posts using the pre-drilled
holes and the (2) 2½" self-drilling stainless steel screws.
STEP 3.3
STEP 3.4
To Next Page
Loading...
