Total Bandwidth Settings
You can setup the total upload/ download bandwidth manually (default 102400).
Bandwidth QoS Settings
Items Information
Enable this Rule
Mark to enable the configuration, and clear to disable.
Type
Select the type of download or upload.
LAN IP Address
Fill in the MAC address that you are going to control.
Priority
Select the transmission priority of low, medium, high,
or highest.
Bandwidth
Fill in the minimum and maximum bandwidth.
Comment
Give a definition to the LAN IP Address.
Action
After configuring the above settings, click Add to add
a new list in the following MAC Access Control List.
The Change button can be used to change the
configuration.
* Please click on the Save Settings button or the Reset Settings button on the above table to
save/reset the configurations.
Bandwidth QoS Settings
Lists the Bandwidth QoS Settings you have added before. Click on the list to
change configuration, or the Delete button to delete the list.
16
To Next Page
Loading...
Need help?
General
