Virtual Server Settings
Items Information
Enable this Rule
Mark to enable the configuration, and clear to
disable.
Application Select
Select an application for your demand.
WAN Port
Fill in the port number of WAN.
Protocol
Select the protocol type of TCP, UDP or Both
LAN Server IP
Fill in the IP of your LAN Server.
LAN Port
Fill in the port number of LAN.
Action
After configure the above settings, click Add to add
a new list in the following IP Filter Rule List. The
Change button can be used to change the
configuration.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Virtual Server Mapping List
Lists the Virtual Server Settings you have added before. Click on the list to change
configuration, or the Delete button to delete the list.
31
To Next Page
Loading...
Need help?
General
