Remote management
Allows you to designate a host in the Internet. The ability to configure the
Broadband router from a remote site. Enter the designated host IP Address
in the Host IP Address field.
Host Address: This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from
a remote site. If the Host Address is left 0.0.0.0 this means
anyone can access the router’s web-based configuration from a
remote location, providing they know the password.
Port: The port number of the remote management web interface.
Enabled: Check to enable the remote management function.
Click <Apply> at the bottom of the screen to save the above configurations.
- Time
The Time Zone allows your router to refer or base its time on the settings
configured here, which will affect functions such as Log entries and Firewall
settings.
Setting Up Time:
Synchronize with the NTP server
77
To Next Page
Loading...
Need help?
General
