EasyManuals Logo

Encore ENRTR-104 User Manual

Encore ENRTR-104
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
demand button to dial up to the ISP when only on demand, while there is
a need of connecting to the ISP automatically.
1-2-4 PPTP
If connected to the Internet using
a (PPTP) xDSL Modem, enter
the PPTP Account Name, PPTP
Password, Host Name, Service
IP Address, Your IP Address,
Your Subnet Mask required by
your ISP in the appropriate
fields. If your ISP has provided
you with a Connection ID, enter
it in the Connection ID field,
otherwise, leave it zero.
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most DSL users, it is
recommended to use 1460. By default, MTU is set at 1460
The Maximum Idle Time feature can control the connection time while
user’s need to save the cost of connection fee from ISP provider (default
time=0, always connect). Click on the Connect-on-demand button to dial
up to the ISP when only on demand, while there is a need of connecting to
the ISP automatically.
1-3 DNS
The Domain Name System (DNS) is the way that Internet domain names
are located and translated
into Internet Protocol (IP)
addresses.
If your ISP provided at least one DNS Server IP Address, type that IP
Address in the Primary DNS address fields. You can type up to another
DNS Server IP Addresses. The Router will utilize these for quicker access
to functioning DNS Servers.
19

Other manuals for Encore ENRTR-104

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Encore ENRTR-104 and is the answer not in the manual?

Encore ENRTR-104 Specifications

General IconGeneral
BrandEncore
ModelENRTR-104
CategoryWireless Router
LanguageEnglish

Related product manuals