EasyManua.ls Logo

Endress+Hauser Analytik Jena TOPwave - Warranty and Liability

Endress+Hauser Analytik Jena TOPwave
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TOPwave Basic information
7
Since such scorching cannot always be avoided, even with optimum microwave power
regulation, damage of this kind is excluded from the warranty! When quartz glass inse-
rts are employed, the greatest care must be taken when handling the glass as even the
slightest amount of damage to the surface can greatly diminish surface strength. For
this reason, glass components are excluded from the warranty!
Adapters for evaporating and concentrating digestion solutions are optionally available
for all vessel types, except PM 40.
Qualified handling and, possibly, proper transport, storage, set-up, and use, as well as
conscientious maintenance are all prerequisites for the trouble-free and safe operation
of the TOPwave microwave digestion system.
The system may only be used within the context of data and applications specified in
this documentation and the associated user manuals.
The digestion system may only be used:
intended
in a technically flawless condition
without unauthorized alterations or modifications
by qualified users
Please also observe all regulations published by professional/trade associations, the
TÜV, VDE regulations, or corresponding national regulations.
1.3 Warranty and liability
The warranty duration and liability comply with the legal requirements and the provisi-
ons in the general terms and conditions of Analytik Jena.
Deviations from the intended use described in this user manual result in limitations of
warranty and liability during a damage event. Damage to wearing parts is not included
in the warranty.
Warranty and liability claims are excluded for personal injury and property damage due
to one or several of the following causes:
use of the TOPwave other than intended
improper commissioning, operation and servicing of the device
modifications of the equipment without prior consultation with Analytik Jena
operation of the device with faulty safety equipment or improperly fitted safety and
protection equipment
inadequate monitoring of the equipment components subject to wear
use of other than original spare parts, wearing parts or consumables
improper repairs
faults due to the non-observance of this user manual

Table of Contents

Related product manuals