TOPwave Operating
29
Button Description
[APPLICATION] Function for selecting or modifying a stored application. Active appli-
cation is displayed. (in example above "Calcite; Dolomite")
[DATA] Function to review stored digestion process data. Last data file is dis-
played. (in example above "Data:Calibrations_2")
LOGGED IN AS Open login window and change login status.
[OPEN] Release the electronic lid locking (only possible when microwave is
stopped)
[START] Configure and start of microwave
[SETUP] Setup menu. Access only as MASTER (LOGGED IN AS MASTER)
[SERVICE] Service menu, Access for authorized service technicians only.
6.1.3 Selecting/modifying Applications
The operator can select from a total of 200 applications, 25 of which are preinstalled.
After accessing the [A
PPLICATION] function initially a selection of maximally 12 appli-
cations is displayed which the user can compile to form a "User Library - Favorites".
Furthermore, 3 standard applications are stored:
PRESSURE ADJUST, POWER TEST and
FUNCTION TEST.
Press the button of the desired application in the library.
The number of the selected application is displayed in the field "
SELECT APPLICATION".
Confirm the selection with [OK].
Select a list place in the library and press [
ADD].
A table of all available applications will be displayed. The first 25 storage places are oc-
cupied by standard applications; which will be installed during program installation. The
places 26-30 are reserved for application updates. All over storage places can be used
for own applications.
Function buttons of the
Main menu
Select application
Add/change an applica-
tion in the library
To Next Page
Loading...
