Installation instructions TMT162 HART
22 Endress+Hauser
2.3.2 Remote mounting
A0003586-DE
Fig. 3: Installation of the field transmitter using the mounting kit. Dimensions in mm (inch)
Pos. A, B Mounting with combined wall/pipe mounting kit
Pos. C Mounting with pipe mounting kit 2"/V4A
2.4 Post-installation check
After installing the device, always run the following final checks:
Device condition and specifications Notes
Is the device visibly free of damage (visual check)? -
Does the device comply to the measurement point
specifications, such as ambient temperature, etc.?
→ Chap. 2.2
To Next Page
Loading...
