TI00358F/00/EN/15.12
71198459
Technical Information
Levelflex M FMP40
Guided Level Radar
Continuous Level Transmitter for
- Level Measurement in Bulk Solids and Liquids
- Interface Measurement in Liquids
Application
Level measurement
Continuous level measurement of powdery to granular
bulk solids e.g. plastic granulate and liquids.
• Measurement independent of density or bulk weight,
conductivity, dielectric constant, temperature and
dust e.g. during pneumatic filling.
• Measurement is also possible in the event of foam or if
the surface is very turbulent.
• The HART with 4 to 20 mA analog, PROFIBUS PA and
FOUNDATION Fieldbus protocols are available for
system integration.
• Application in safety related systems (overspill
protection) with requirements for functional safety up
to SIL 2 in accordance with IEC 61508/IEC 61511-1.
• WHG approval
Interface measurement
Continuous measurement of interfaces between two
liquids with very different dielectric constants, such as in
the case of oil and water for example.
• Measurement independent of density, conductivity
and temperature
• Electronics version for the simultaneous measurement
of the level of interfaces and the total level in liquids.
The HART with 4 to 20 mA analog protocol is
available for system integration
• Special version for the measurement of the level of
interfaces at a constant total level. The PROFIBUS PA
and FOUNDATION Fieldbus protocols are available
for system integration.
Your benefits
Probes are available with threaded process connections
from ¾" and flanges from DN40 (1½").
• Rope probes, above all for measurement in bulk solids,
measuring range up to 35 m.
• Rod probes, above all for liquids
• Coax probes, for liquids
• Simple, menu-guided onsite operation with four-line
plain text display.
• Onsite envelope curve on the display for easy
diagnosis.
• Easy remote operation, diagnosis and measuring point
documentation with the free operating program
supplied.
• Optional remote display and operation.
• With coax probes the measurement is independent of
internals in the tank and of the installation in the
nozzle.
• Probe rod and probe rope can be replaced/shortened.
• Approvals: ATEX, FM, CSA, TIIS, NEPSI, IECEx.
To Next Page
Need help?
General
