Endress+Hauser Micropilot FMR51 - Page 68

Micropilot FMR51, FMR52
68 Endress+Hauser
FMR51: Dimensions of the horn antenna
Feature 070 "Antenna"
Dimension BA: Horn 40mm/1-1/2" BB: Horn 50mm/2" BC: Horn 80mm/3" BD: Horn 100mm/4"
L 86 mm (3.39 in) 115 mm (4.53 in) 211 mm (8.31 in) 282 mm (11.1 in)
L2 51 mm (2.01 in) 80 mm (3.15 in) 176 mm (6.93 in) 247 mm (9.72 in)
d 40 mm (1.57 in) 48 mm (1.89 in) 75 mm (2.95 in) 95 mm (3.74 in)
FMR51: Dimensions of the process connections
Flanges according to EN1092-1 (suitable for DIN2527)
1)
Pressure rating Dimension Nominal diameter
2)
DN50 DN80 DN100 DN150
PN10/16
b 18 mm (0.71 in) 20 mm (0.79 in) 20 mm (0.79 in) 22 mm (0.87 in)
⌀D
165 mm (6.5 in) 200 mm
(7.87 in)
220 mm (8.66 in) 285 mm
(11.2 in)
PN25/40
b 20 mm (0.79 in) 24 mm (0.94 in) 24 mm (0.94 in) -
⌀D
165 mm (6.5 in) 200 mm
(7.87 in)
235 mm (9.25 in) -
PN63 b - - 30 mm (1.18 in) -
⌀D - - 250 mm (9.84 in) -
PN100 b - - 36 mm (1.42 in) -
⌀D - - 265 mm (10.4 in) -
1) For flanges with a higher pressure rating than those listed in the product structure please contact Endress
+Hauser.
2) see feature 100 "Process connection"
Flanges according to JIS B2220
1)
Nominal diameter
2)
Pressure
rating
2)
Dimension 50A 80A 100A 150A
10K
b 16 mm (0.63 in) 18 mm (0.71 in) 18 mm (0.71 in) 22 mm (0.87 in)
D 155 mm (6.1 in) 185 mm (7.28 in) 210 mm (8.27 in) 280 mm (11 in)
63K b - - 44 mm (1.73 in) -
D - - 270 mm (10.6 in) -
1) For flanges with a higher pressure rating than those listed in the product structure please contact Endress
+Hauser.
2) see feature 100 "Process connection"