Endress+Hauser Micropilot FMR51 - Page 69

Micropilot FMR51, FMR52
Endress+Hauser 69
Flanges according to ANSI B16.5
1)
Nominal diameter
2)
Pressure
rating
2)
Dimension 2" 3" 4" 6"
150 lbs
b 17.5 mm
(0.69 in)
22.3 mm
(0.88 in)
22.3 mm
(0.88 in)
23.9 mm
(0.94 in)
D 150 mm (6 in) 190 mm (7.5 in) 230 mm (9 in) 280 mm (11 in)
300 lbs b 20.7 mm
(0.81 in)
27 mm (1.1 in) 30.2 mm (1.2 in) 35 mm (1.4 in)
D 165 mm (6.5 in) 210 mm
(8.25 in)
255 mm (10 in) 320 mm
(12.5 in)
1) For flanges with a higher pressure rating than those listed in the product structure please contact Endress
+Hauser.
2) see feature 100 "Process connection"
Tri-Clamp according to ISO 2852
Nominal diameter
1)
Dimension DN40-51 (2") DN70-76.1 (3")
A 64 mm (2.52 in) 91 mm (3.58 in)
1) see feature 100 "Process connection"