Endress+Hauser Nivotester FTL325P - 4 Incoming acceptance and product identification; 4.1 Incoming acceptance; 4.2 Product identification

Installation Nivotester FTL325P single-channel
8 Endress+Hauser
3.3.1 Transporting the product to the measuring point
Transport the measuring device to the measuring point in the original packaging.
4 Installation
4.1 Mounting conditions
• If using outside the hazardous area, mount the device in a cabinet.
• Mount the device so that it is protected against weather and impact.
If operating outdoors and in warmer climates, avoid direct sunlight.
Protective housing (IP65) is available for up to four single-channel Nivotester devices or two
3-channel Nivotester devices.