Endress+Hauser Oxymax COS22 Series - Page 32

Technical data Oxymax COS22
32 Endress+Hauser
13.5 Mechanical construction
Dimensions
Pg 13,5
54 (2.13)
120 / 225 / 360 / 420 (4.72 / 8.86 / 14.2 / 16.5)*
12 - 0.1
(0.47)
A0011886
 10 Dimensions in mm (inch)
Flow assembly for sensors
with Ø 12 mm (accessories)
28 (1.10)
Ø6 (0.24)
39 (1.54)
160 (6.30)
30
(1.18)
Ø6 (0.24)
Ø 29 x 1.5 (1.14 x 0.06)
A0015019
 11 Dimensions in mm (inch)
Weight Depending on the design (length)
0.2 kg (0.44 lbs) to 0.7 kg (1.54 lbs)
Materials
Parts in contact with medium
Sensor shaft (depending on the version) Stainless steel 1.4435 (AISI 316L)
Titanium
Alloy C22
Electrode combination COS22-*1/3: silver / platinum
Process seal VITON (FDA-compliant)
Process seal for ATEX/FM/CSA/NEPSI/TIIS VITON (not FDA-compliant)
Seals/O-rings
Membrane body, sealing ring for shaft sleeve
VITON (FDA-compliant)
Perfluoroelastomer with USP88 Class VI
Membrane Silicone (FDA-compliant, in compliance
with USP87/88 class VI), PTFE, steel mesh
Process connection Pg 13.5