Flowmeter Proline 200 PROFINET with Ethernet-APL Product description
Endress+Hauser 9
2.6 IT security
Our warranty is valid only if the product is installed and used as described in the Operating
Instructions. The product is equipped with security mechanisms to protect it against any
inadvertent changes to the settings.
IT security measures, which provide additional protection for the product and associated data
transfer, must be implemented by the operators themselves in line with their security
standards.
2.7 Device-specific IT security
The device offers a range of specific functions to support protective measures on the operator's
side. These functions can be configured by the user and guarantee greater in-operation safety
if used correctly.
For detailed information on device-specific IT security, see the Operating Instructions for
the device.
2.7.1 Protecting access via a password
A password can be used to protect against write access to the device parameters.
This controls write access to the device parameters via the local display or other operating
tools (e.g. FieldCare, DeviceCare) and, in terms of functionality, corresponds to hardware write
protection. If the CDI service interface is used, read access is only possible by first entering the
password.
User-specific access code
Write access to the device parameters via the local display or operating tool (e.g. FieldCare,
DeviceCare) can be protected by the modifiable, user-specific access code.
3 Product description
The device consists of a transmitter and a sensor.
Two device versions are available:
• Compact version – transmitter and sensor form a mechanical unit.
• Remote version - transmitter and sensor are mounted in separate locations.
For detailed information on the product description, see the Operating Instructions for
the device → 3
4 Mounting
For detailed information about mounting the sensor, see the Sensor Brief Operating
Instructions → 3
To Next Page
Loading...
