Endress+Hauser Prosonic T FMU 230 - Operation Via Commulog VU 260 Z; Operation Via Universal HART Communicator DXR 275

19Endress+Hauser
Prosonic T - FMU 130, 131, 230, 231, 232
Operation via Commulog VU 260 Z
Prosonic T with INTENSOR protocol can be set via the Commulog VU 260 Z handheld
terminal (from Version 1.7), see also Operating Instructions BA 028F.
• Select the matrix field with , , ,
• Call up the input mode with
• Enter parameters with , , , ,
• On error calls up the error message in plain text
Operation via Universal HART Communicator DXR 275
For the HART protocol an interactive menu is used which is supported by the matrix (see
also the operating manual for the handheld terminal).
• The menu “Group Select” calls up the matrix.
• The lines show menu headings.
• Parameters are set using submenus.
LCD with
– parameter
– VH position
– bar display
Function keys
– “Diagnosis”
– “Home”
– “Entry”
Keys for
selecting matrix and
entering parameters
LCD with
menu commands
Function keys
Selecting the menu
Push-button
for entering